Researchers
Terek, Pal
Results 81-92 of 92
| Issue Date | Title | Author(s) | Type | Мp-cat. |
|---|---|---|---|---|
| 2011 | Mechanical properties of TiN coatings deposited at different temperatures by IBAD![]() | Damir Kakaš; Škorić, Branko | Conference Paper | Mp. category will be shown later |
| 2011 | Influence of dry sliding conditions and coating roughness on the wear of titanium nitride coatings deposited at low temperature![]() | Damir Kakaš; Škorić, Branko | Conference Paper | Mp. category will be shown later |
| 2011 | Influence of sliding speed and surface roughness on the friction coefficient and wear TiN coatings deposited at low temperature![]() | Kakaš, Damir | Conference Paper | Mp. category will be shown later |
| 2011 | Influence of substrate roughness on adhesion strength of hard TiN films![]() | Kakaš, Damir; Škorić, Branko | Conference Paper | Mp. category will be shown later |
| 2011 | Influence of interfacial layer thickness and substrate roughness on adhesion of TiN coatings deposited at low temperatures by IBAD![]() | KAKAS, DAMIR; Terek, Pal | Article | 23M23 |
| 2011 | Neutral Radius Value Determination by Numerical Simulation Method at Ring Upsetting Test![]() | Vilotić, Marko | Article | Mp. category will be shown later |
| 2010 | Micro/nano tribological phenomenon investigation by AFM and SEM![]() | Damir Kakaš; Škorić, Branko | Conference Paper | Mp. category will be shown later |
| 2010 | Cast porosity investigation by electron microscopy![]() | Kakaš, Damir | Conference Paper | Mp. category will be shown later |
| 2010 | Razvoj nanokompozitnih prevlaka visoke tvrdoće![]() | Damir Kakaš; Škorić, Branko | Conference Paper | Mp. category will be shown later |
| 2010 | Numerical Simulation Of Upsetting Of Cylinder By Conical Die With Experimental Test![]() | Ivanišević, Aljoša; Kačmarčik, Igor; Terek, Pal | Conference Paper | Mp. category will be shown later |
| 2009 | Surface Roughness and Friction Coefficient in IBAD Deposited Tin Hard Coating![]() | Kakaš, Damir | Article | 51M51 |
| 2009 | Use of sem and eds analysis in the investigation of al-si-cu piston alloy cast porosity![]() | Kakas, Damir | Article | 22M22 |
