Researchers
Kakaš, Damir
Type
Date issued
Results 1-20 of 22
| Issue Date | Title | Author(s) | Type | Мp-cat. |
|---|---|---|---|---|
| 2016 | Effects of die core treatments and surface finishes on the sticking and galling tendency of Al–Si alloy casting during ejection | Terek, Pal   ; Kovačević, Lazar ; Miletić, Aleksandar ; Panjan, Peter; Baloš, Sebastian ; Škorić, Branko ; Kakaš, Damir | Article | 21aM21a |
| 2015 | Application of casting simulations in optimization of gating system with vertical runner extension | Kovačević, Lazar ; Terek, Pal ; Miletić, Aleksandar ; Kukuruzović, Dragan ; Kakaš, Damir | Conference Paper | Mp. category will be shown later |
| 2015 | Surface roughness and morphology of dental nanocomposites polished by four different procedures evaluated by a multifractal approach | Ţălu, Ştefan; Stach, Sebastian; Lainović, Tijana ; Vilotić, Marko ; Blažić, Larisa ; Alb, Sandu Florin; Kakaš, Damir | Article | 21aM21a |
| 2014 | Dependence of interfacial heat transfer coefficient on casting surface temperature during solidification of Al–Si alloy castings cast in CO2 sand mold | Kovačević, Lazar ; Terek, Pal ; Miletić, Aleksandar ; Kakaš, Damir | Article | 22M22 |
| 2014 | Effect of Diamond Paste Finishing on Surface Topography and Roughness of Dental Nanohybrid Composites – AFM Analysis | Lainović, Tijana ; Blažić, Larisa ; Kukuruzović, Dragan ; Vilotić, Marko ; Ivanišević, Aljoša; Kakaš, Damir | Conference Paper | Mp. category will be shown later |
| 2013 | Severe Plastic Deformation by Multistage Compression | Vilotić, Marko ; Kakaš, Damir ; Šiđanin, Leposava ; S. Aleksandrov; J. Dženg; Terek, Pal | Article | 51M51 |
| 2013 | Friction and wear of low temperature deposited TiN coating sliding in dry conditions at various speeds | Damir Kakaš ; Terek, Pal ; Miletić, Aleksandar ; Kovačević, Lazar ; Vilotić, Marko ; Škorić, Branko ; Dragomir Krumes | Article | 22M22 |
| 2013 | Determination of Metal-Mold Heat Transfer Coefficient During CO2 Sand Casting | Kovačević, Lazar ; Terek, Pal ; Kakaš, Damir ; Miletić, Aleksandar ; Kukuruzović, Dragan | Conference Paper | Mp. category will be shown later |
| 2013 | Influence of substrate roughness on adhesion of TiN coatings | Miletić, Aleksandar ; Terek, Pal ; Kovačević, Lazar ; Vilotić, Marko ; Kakaš, Damir ; Škorić, Branko ; Kukuruzović, Dragan | Article | 23M23 |
| 2012 | Mechanical Properties of TiN Coatings Deposited at Different Temperatures by IBAD Process | Kakaš, Damir ; Škorić, Branko ; Terek, Pal ; Miletić, Aleksandar ; Kovačević, Lazar ; Vilotić, Marko | Article | 24M24 |
| 2012 | Influence of friction coefficient on workpiece roughness in ring upsetting process | Vilotić, Marko ; Kakaš, Damir ; Miletić, Aleksandar ; Kovačević, Aleksandar ; Terek, Pal | Article | 53M53 |
| 2011 | Influence of Sliding Speed and Surface Roughness on the Friction Coefficient and Wear of TiN Coatings Deposited at Low Temperature | Kakas, D. ; Škoric, B.; Terek, P.; Kovačević L.; Miletic, A.; Vilotic, M.; Mitrovic, Slobodan ; Babic M. | Conference Paper | Mp. category will be shown later |
| 2011 | Influence of sliding speed and surface roughness on the friction coefficient and wear TiN coatings deposited at low temperature | Kakaš, Damir ; Škorić, Branko ; Terek, Pal ; Kovačević, Lazar ; Miletić, Aleksandar ; Vilotić, Marko ; Mitrović, Slobodan ; Babić, Miroslav | Conference Paper | Mp. category will be shown later |
| 2011 | Neutral Radius Value Determination by Numerical Simulation Method at Ring Upsetting Test | Vilotić, Marko ; Kakaš, Damir ; Terek, Pal ; Kovačević, Lazar ; Miletić, Aleksandar | Article | Mp. category will be shown later |
| 2010 | Cast porosity investigation by electron microscopy | Kakaš, Damir ; Kovačević, Lazar ; Terek, Pal | Conference Paper | Mp. category will be shown later |
| 2010 | Karakterizacija površina mikro i nano prevlaka | Škorić, Branko ; Damir Kakaš | Monograph | Mp. category will be shown later |
| 2009 | Influence of Load and Sliding Speed on Friction Coefficient of IBAD Deposited TiN | Kakas, D. ; Skoric, B.; Mitrovic, Slobodan ; Babic, Miroslav; Terek, P.; Miletic, A.; Vilotic, M. | Article | Mp. category will be shown later |
| 2009 | Use of sem and eds analysis in the investigation of al-si-cu piston alloy cast porosity | Kakas, Damir ; Kovacevic, Lazar ; Terek, Pal ; Krumes, Dragomir; Kolumbic, Z | Article | 22M22 |
| 2009 | Surface Roughness and Friction Coefficient in IBAD Deposited Tin Hard Coating | Kakaš, Damir ; Škorić, Branko ; Babić, Miroslav; Mitrović, Slobodan ; Miletić, Aleksandar; Vilotić, Marko ; Terek, Pal ; Kovačević, L. | Article | 51M51 |
| 2004 | Structure, hardness and adhesion of thin coatings deposited by PVD, TBAD on nitrided steels | Skoric, B; Kakas, D ; Rakita, M; Bibić, Nataša M.; Peruskob, D | Article | 22M22 |