Results 1-20 of 50
Issue DateTitleAuthor(s)TypeМp-cat.
2026An Experimental–Numerical Framework for Springback Prediction and Angle Compensation in Air Bending with Additively Manufactured Polymer ToolsMandic, Vesna  ; Delić, Marko  ; Adamovic, Dragan  ; Arsić, Dušan  ; Ratkovic, Nada  ; Ivković, Djordje  ; Ilic, AndjelkaArticle
21M21
2026A new artificial neural network model for prediction of fatigue strength and yield strength of various steel gradesIvković, Djordje  ; Arsić, Dušan  ; Adamovic, Dragan  ; Sedmak, Aleksandar  ; Delić, Marko  ; Vulovic, Radun  Article
21aM21a
2026Artificial neural network based estimation of wear trace width in hard-faced structural componentsIvković, Djordje  ; Arsić, Dušan  ; Lazic, Vukic  ; Nikolic, Ruzica; Pastorková, Jana; Bokuvka, Otakar; Vicen, MartinConference Paper
Mp. category will be shown later
2025Selection of Base Materials for Repair Welding Using BWM-TOPSIS and BWM-RADAR ApproachesArsić, Dušan  ; Ivković, Djordje  ; Sudžum, Ranka; Marinkovic, Dragan  ; Komatina, Nikola  Article
21M21
2025Experimental Investigations Of Tensile Properties Of Ultra-High Strength Steel S1100QL At Room And Elevated TemperaturesIvković, Djordje  ; Arsić, Dušan  ; Lazic, Vukic  ; Aleksandrovic, Srbislav  ; Ivkovic, Andjela; Delić, Marko  Article
Mp. category will be shown later
2025Influence of elevated temperatures on tensile properties of hot-work tool steel 55NiCrMoV7Arsić, Dušan  ; Ivković, Djordje  ; Nikolic, Ruzica ; Djordjevic, Milan  ; Vulovic, Radun  ; Bokuvka, OtakarConference Paper
Mp. category will be shown later
2025Resistance to fatigue crack initiation and propagation in hardfaced layers of hot-work tool steelsArsić, Dušan  ; Lazic, Vukic  ; Ivković, Djordje  ; Delić, Marko  ; Arsić, Aleksandra  ; Perkovic, Srdja; Radovic, Ljubica  Conference Paper
Mp. category will be shown later
2025Influence of vanadium on microstructure and mechanical properties of high-alloyed steelTodic, Aleksandar  ; Djordjevic, Milan  ; Arsić, Dušan  ; Nikolic, Ruzica; Ivković, Djordje  ; Cvetković, Dragan  Conference Paper
Mp. category will be shown later
2025Impact of building stone type on selection of materials for the construction machinery partsArsić, Dušan  ; Nikolic, Ruzica; Ivković, Djordje  ; Arsić, Aleksandra  ; Bokuvka, OtakarConference Paper
Mp. category will be shown later
2025Influence of FDM printing parameters on the compressive mechanical properties and fracture of ABS materialDelić, Marko  ; Mandic, Vesna  ; Aleksandrovic, Srbislav  ; Arsić, Dušan  ; Ivković, Djordje  ; Ratkovic, Nada  ; Adamovic, Dragan  Article
Mp. category will be shown later
2025The influence of the hard-faced layers pattern on the wear resistance of the wheel loader’s bucket teethIvković, Djordje  ; Arsić, Dušan  ; Lazic, Vukic  ; Delić, Marko  ; Ivkovic, Andjela; Bujnakova, PetraConference Paper
Mp. category will be shown later
2025Analysis of deep drawing process using FEA and FLDDelić, Marko  ; Mandic, Vesna  ; Aleksandrovic, Srbislav  ; Arsić, Dušan  ; Ivković, Djordje  Conference Paper
Mp. category will be shown later
2025Investigation of Tensile Properties at Room and Elevated Temperatures of S1100QL Steel and Its Welded JointsIvković, Djordje  ; Arsić, Dušan  ; Radovic, Ljubica  ; Ilić, Nada  ; Mandić, Jovana  ; Delić, Marko  ; Ivkovic, AndjelaArticle
21M21
2025Fatigue performance comparison of STRENX 700 and 55NiCrMoV7 steelsArsić, Dušan  ; Jovičić, Gordana  ; Zivkovic, Miroslav  ; Pešić, Miloš  ; Topalović, Marko  ; Ivković, Djordje  ; Delić, Marko  Conference Paper
Mp. category will be shown later
2025A new artificial neural network model for predicting fatigue limit and fracture toughness values of some stainless steelsIvković, Djordje  ; Arsić, Dušan  ; Sedmak, Aleksandar  ; Adamovic, Dragan  ; Mandic, Vesna  ; Delić, Marko  ; Andjela, MitrovićArticle
Mp. category will be shown later
2025Influence of continuously variable lateral force on thickness of the material during strip thinningDjačić, Slaviša; Aleksandrovic, Srbislav  ; Arsić, Dušan  ; Delić, Marko  ; Ivković, Djordje  ; Djordjevic, Milan  Conference Paper
Mp. category will be shown later
2025Material selection for tribologically loaded componentsAdamovic, Dragan  ; Arsić, Dušan  ; Mandic, Vesna  ; Ivković, Djordje  ; Delić, Marko  ; Ratkovic, Nada  Conference Paper
Mp. category will be shown later
2025Numerical analysis of the ironing process under conditions of variable lateral forceDelić, Marko  ; Djačić, Slaviša; Aleksandrović, Srbislav  ; Mandić, Vesna  ; Arsić, Dušan  ; Ivković, Djordje  ; Adamović, Dragan  Conference Paper
Mp. category will be shown later
2025Analysis of savings potential through the application of welding repair for the revitalization of parts in construction machineryArsić, Dušan  ; Lazic, Vukic  ; Ivković, Djordje  ; Arsić, Aleksandra  ; Bujnakova, PetraConference Paper
Mp. category will be shown later
2025Comparative evaluation of experimental and phase-field modeling approaches in the tensile response of S1100QL steelBodić, Aleksandar  ; Dunić, Vladimir  ; Ivković, Djordje  ; Arsić, Dušan  ; Zivkovic, Miroslav  Conference Paper
Mp. category will be shown later