Univerzitet u Beogradu, Mašinski fakultet

Type

Date issued

10150 2000 - 2027
276 1000 - 1999

Mp-cat.

5086 М30/М60
1004 M22
849 M20/M50
487 M21
466 other
429 M10/M40
326 M21a
325 M80
319 M51
263 M24
. next >

Date issued - custom

Year from:

Year to:

Results 4,501-4,520 of 10,426 Results/Page

The results include the works of researchers who are CURRENTLY employed at the displayed institution.

Reference manager: EndNote Bibtex Excel CSV eScience

Issue Date	Title	Author(s)	Type	Мp-cat.
2017	Primena modifikovanog električnog luka za zavarivanje korenog prolaza cevi od austenitnih nerđajućih čelika	Jovičić, Radomir ; Popović, Olivera ; Prokić-Cvetković, Radica ; Burzić, Meri ; Burzić, Zijah	Conference Paper	Mp. category will be shown later
2017	Effect of piezoelectric fiber-reinforced composite (PFRC) actuator orientation on controllability of antisymmetric composite plates for active vibration control	Zorić, Nemanja D. ; Tomović, Aleksandar M. ; Jovanović, Miroslav M.; Lukić, Nebojša S. ; Stokić, Zoran M.	Conference Paper	Mp. category will be shown later
2017	Virtual machine tools and robots for machining simulation based on STEP-NC program	Živanović, Saša T. ; Slavković, Nikola R. ; Dimić, Zoran Ž. ; Goran Vasilic ; Puzović, Radovan M. ; Milutinović, Dragan S.	Conference Paper	Mp. category will be shown later
2017	Višekriterijumska optimizacija postrojenja za proizvodnju demineralizovane vode iz toplih izvora	Petrović, Andrija ; Petrović, Aleksandar	Monograph	Mp. category will be shown later
2017	Application of polymethil-methacrylate blocks in experimental analysis of effect of dental implant geometry on the surrounding structure during axial loading	Šarac, Dušan Č. ; Mitrović, Nenad R. ; I. Tanasić; Mišković, Žarko Z. ; L. Tihaček Šojić	Conference Paper	Mp. category will be shown later
2017	Generalized kinematic modelling approach for reconfigurable parallel robots and machine tools based on delta concept	Milutinović, Milan D.; Slavković, Nikola R. ; Kokotović, Branko M. ; Milutinović, Dragan S. ; Živanović, Saša T.	Conference Paper	Mp. category will be shown later
2017	Softverski alati u dizajnu	Miloš, Marko; Grbović, Aleksandar	Monograph	Mp. category will be shown later
2017	Approaches in forensic engineering of excavating units operating on open pit mines of Serbia	Gnjatović, Nebojša B. ; Pantelić, Milorad P. ; Milenović, Ivan Lj. ; Stefanović, Aleksandar Z. ; Bošnjak, Srđan M.	Conference Paper	Mp. category will be shown later
2017	Analysis and optimization of underactuated finger for CMSysLab robotic hand	M.Lukić; Lazarević, Mihailo P. ; Petrović, Petar B.	Conference Paper	Mp. category will be shown later
2017	A Survey of Researches in the Field of Ecodesign Related to Intralogistics at the University of Belgrade - Faculty of Mechanical Engineering (2010-2017)	Zrnić, Nenad Đ.	Conference Paper	Mp. category will be shown later
2017	Combine three to one sub-harmonic resonance of nanobeam on fractional visco-Pasternak type foundation	Cajić, Milan S. ; Karličić, Danilo Z. ; Lazarević, Mihailo P.	Conference Paper	Mp. category will be shown later
2017	Interfaces for distributed remote user controlled manufacturing as collaborative environment	Spasojević Brkić, Vesna ; Putnik, Goran; Veljković, Zorica ; Shah, Vaibhav; Essdai, A.	Conference Paper	Mp. category will be shown later
2017	Machining simulation of virtual reconfigurable 5 axis machine tool	Živanović, Saša T. ; Slavković, Nikola R. ; Kokotović, Branko M. ; Milutinović, Dragan S.	Article	Mp. category will be shown later
2017	Gear Transmission Failures and Failure Based Design	M. Ognjanović; Kolarević, Nenad M. ; Stanković, Miloš B. ; Vasin, Sanja Lj.	Conference Paper	Mp. category will be shown later
2017	EXPERIMENTAL AND NUMERICAL ANALYSIS OF FLOW FIELD AND VENTILATION PERFORMANCE IN A TRAFFIC TUNNEL VENTILATED BY AXIAL FANS	Janković, Novica Z. ; M. Šekularac	Conference Paper	Mp. category will be shown later
2017	ELV recycling influence model on sustainable development	Pavlović, Aleksandar M. ; Vulić, Miroslav N. ; Tomović, Aleksandar M. ; B. Hamuda; Tadić, Danijela P.	Conference Paper	Mp. category will be shown later
2017	The Relationship between Ergonomics, Safety and Aesthetics in the Design of Consumer Products and Systems (Chapter 1)	Žunjić, Aleksandar G. ; Panagiotis V. Tsaklis; Xiao-Guang Yue	Book parts	Mp. category will be shown later
2017	Conditional optimization of computer automatic control system of an selected plant at arbitrary initial conditions	Zarić, Vladimir ; Bučevac, Zoran; Jovanović, Radiša	Conference Paper	Mp. category will be shown later
2017	Software/hardware design of decision-making controllers for object navigation in horizontal plane	Boulahlib, Mohammed Amine; Milinović, Momčilo ; Bendjaballah, Mourad; Jeremić, Olivera ; Sakan, Nenad	Article	22M22
2017	Application of modified multi-objective particle swarm optimisation algorithm for flexible process planning problem	Miljković, Zoran ; Petrović, Milica	Article	21M21