|
| Issue Date | Title | Author(s) | Type | Мp-cat. |
| 2025 | TENSILE STRENGTH ANALYSIS OF POLYMERS FABRICATED USING FUSED FILAMENT FABRICATION | Lazarević, Natalija; Andjelić, Kristina; Lazić, Aleksandar; Popović, Mihajlo   ; Mladenović, Goran ; Pjević, Miloš ; Milovanović, Aleksa | Conference Paper | |
| 2025 | Considerations on the Design of Inland Vessels for the Danube | Momčilović, Nikola | Conference Paper | |
| 2025 | The effect of blade turning angle on rotation improvement of a small horizontal axis wind turbine | Tanovic, Dragoljub ; Simonovic, Aleksandar ; Kostic, Olivera ; Svorcan, Jelena | Article | |
| 2025 | Efficiency Assessment of a High-Speed Tracked Vehicle Hybrid Powertrain | Ponorac, Luka; Blagojevic, Ivan A | Article | |
| 2025 | From Lucy Ashton to Future CFD Case Studies: Benchmarking Ship Resistance at Full and Model Scales | Kalajdžić, Milan ; Vasilev, Matija ; Ponkratov, Dmitriy | Conference Paper | |
| 2025 | Evaluation of the compressive properties of different 3D-printed Ti6Al4V lattice structures | Mano, Sandor; Petrović, Ana ; Csamer, Lorand; Mankovits, Tamás | Conference Paper | |
| 2025 | VIRTUAL REALITY ENVIRONMENT FOR TEACHING ASSEMBLY SEQUENCE ANALYSIS TO PRODUCTION ENGINEERING STUDENTS | Suvajac, Živojin; Matijašević, Lazar ; Nedeljković, Dušan ; Jakovljević, Živana | Conference Paper | |
| 2025 | INVESTIGATION OF TRIBOLOGICAL BEHAVIOUR OF PA12 SLIDING BEARINGS PRODUCED BY SELECTIVE LASER SINTERING | Simonović, Ivan ; Marinković, Aleksandar ; Milković, Dragan ; Mišković, Žarko ; Trajković, Isaak ; Milošević, Miloš ; Milivojević, Aleksandar | Conference Paper | |
| 2025 | Temporal changes in the flexural properties of 3D-printed ABS specimens | Danilov, Ivan ; Golubović, Zorana ; Milovanović, Aleksa ; Anđelković, Boban ; Živković, Milovan ; Bojović, Božica | Article | |
| 2025 | Extension of the Throughflow Solver for Predicting the Aerodynamic Performance of Fans with Inlet Distortion | Petković, Đorđe ; Banjac, Milan ; Madžar, Teodora; Milić, Srđan ; Petrović, Milan ; Yamashita, Satoshi; Koike, Yuji | Article | |
| 2025 | Genetic diversity of Canine circovirus detected in wild carnivores in Serbia | Benković, Damir; Nišavić, Jakov ; Milić, Nenad ; Krnjaić, Dejan ; Prošić, Isidora ; Gajdov, Vladimir ; Stević, Nataša ; Sukara, Ratko ; Balać, Martina ; Radalj, Andrea | Article | |
| 2025 | Stance and engagement markers in Serbian university students’ essays | Vesić Pavlović, Tijana ; Đorđević, Danijela | Conference Paper | |
| 2025 | EVALUATING THE STRUCTURAL INTEGRITY OF NOVEL DECKHOUSES ON TANKER SHIPS UNDER EXTREME CONDITIONS | Momčilović, Nikola ; Ilić, Nemanja; Kalajdžić, Milan | Article | |
| 2025 | Lifetime Corrosion Loss of Bulk Carriers | Momčilović, Nikola ; Ivošević, Špiro; Kovač, Nataša | Article | |
| 2025 | Dimensional synthesis of a four-bar linkage for closed-path generation performed by the differential evolution algorithm combined with the marine predators algorithm | Nikitović, Aleksandra M. ; Dučić, Nedeljko G. ; Jeli, Zorana V. ; Bulatović, Radovan R. ; Atanasovska, Ivana D. | Article | |
| 2025 | REVERSE ENGINEERING OF AN UAV PROPELLER | Rakić, Milan; Ivanov, Toni ; Pandžić, Adi | Conference Paper | |
| 2025 | The effect of natural aging on the tensile properties of PETG-CF filament | Milošević, Nenad ; Trajković, Isaak ; Maslarević, Aleksandar ; Milošević, Miloš ; Mercuri, Francesco | Conference Paper | |
| 2025 | Excavator Operators’ Working Conditions and Its’ Failure Rates Prediction by Artificial Neural Network Modelling | Spasojević Brkić, Vesna ; Perišić, Martina ; Janev, Nemanja | Book parts | |
| 2025 | Application of artificial neural networks for aerodynamic coefficient prediction of a CST parameterized airfoil | Ivanov, Toni ; Peković, Ognjen ; Svorcan, Jelena | Conference Paper | |
| 2025 | Additive Technologies in the Service of Advanced Robotics and Vice Versa | Pjevic, Milos | Conference Paper | |
Univerzitet u Beogradu, Mašinski fakultet
