Organisations
Inovacioni centar Mašinskog fakulteta u Beogradu d.o.o.
Date issued - custom
The results include the works of researchers who are CURRENTLY employed at the displayed institution.
| Issue Date | Title | Author(s) | Type | М-cat. |
|---|---|---|---|---|
| 2014 | Numerical analysis of temperature field during hardfacing process and comparison with experimental results (✓) | Lazić, Vukić   ; Ivanović, Ivana ; Sedmak, Aleksandar ; Rudolf, Rebeka; Lazić, Mirjana ; Radaković, Zoran | Article | 22M22 |
| 2014 | Diagnostics of bucket wheel excavator discharge boom dynamic performance and its reconstruction | Brkić, Aleksandar ; Ignjatović, Dragan ; Jovančić, Predrag ; Maneski, Taško ; Spasojević-Brkić, Vesna | Article | 22M22 |
| 2014 | Structural, mechanical and tribological characterization of Zn25Al alloys with Si and Sr addition | Vencl, Aleksandar ; Bobić, Ilija ; Vučetić, Filip ; Bobić, Biljana; Ružić, Jovana | Article | 21M21 |
| 2014 | Impact of choice of stabilized hysteresis loop on the end result of investigation of high-strength low-alloy (HSLA) steel on low cycle fatigue | Bulatović, Srđan ; Burzić, Zijah ; Aleksić, Vujadin ; Sedmak, Aleksandar ; Milović, Ljubica | Article | 22M22 |
| 2014 | Techno-economic optimization of plant for raw ethanol production based on experimental data | Jaćimović, Branislav M.; Genić, Srbislav ; Budimir, Nikola ; Jarić, Marko | Article | 21aM21a |
| 2014 | Greške na elementima od aluminijum-magnezijum legure - uticaj uključaka | Aćimović, Zagorka; Terzić, Anja ; Andrić, Ljubiša ; Stojanović, Vera; Pavlović, Marko | Article | 24M24 |
| 2014 | Finite element modelling of creep process - steady state stresses and strains | Sedmak, Aleksandar ; Milović, Ljubica ; Pavišić, Mirko N. ; Konjatić, Pejo I. | Article | 22M22 |
| 2014 | Superplastic deformation of an x7093 al alloy | Prokić-Cvetković, Radica ; Tadić, Srđan ; Sedmak, Aleksandar ; Rudolf Rebeka; E. Abdsalam Madi | Article | 23M23 |
| 2014 | The use of non-contact optical optical systems for determination of fracture mechanics parameters | Đorđević, Branislav R. ; Sedmak, Aleksandar S. ; Sedmak, Simon A. ; Tatić, Uroš D. ; Pavišić, Mirko N. ; J. Perović; Milošević, Miloš S. | Article | Mp. category will be shown later |
| 2014 | Influence of Mechanical Properties and Microstructural Heterogeneity of Welded Joint Constituents on Tensile Properties and Fracture Toughness at Plane Strain, K[Ic] (✓) | Čamagić, Ivica ; Burzić, Zijah ; Sedmak, Aleksandar ; Vasić, Nemanja ; Ćirković, Bogdan ; Algool, Mahdi Mohamed Ahmad | Article | 24M24 |
| 2014 | Uporedna analiza proračuna mašinskih elemenata simuliranjem kombinovanog opterećenja i odvojenim simuliranjem komponentnih opterećenja - studija slučaja | Momčilović, Dejan ; Subić, Aleksandar; Atanasovska, Ivana ; Mitrović, Radivoje | Article | 24M24 |
| 2014 | Identification of low cycle fatigue parameters of high strength low-alloy (HSLA) steel at room temperature | Bulatović, Srđan ; Milović, Ljubica ; Sedmak, Aleksandar ; Samardzić, I. | Article | 22M22 |
| 2014 | Influence of Choice of Crown Design on Load Transfer from Implant to the Bone | Petrović, Ivana; Sedmak, Simon ; Tatić, Uroš ; Sedmak, Aleksandar ; Milošević, Miloš | Article | Mp. category will be shown later |
| 2014 | Influence of the cavity shape in restorative dentistry on the stress-strain distribution in dentin and enamel caused by polymerization | Tatić, Uroš ; Miletić, Vesna ; Sedmak, Simon ; Mitrović, Nenad ; Andrea Ezdenci; Lara Gubeljak; Milošević, Miloš | Article | 24M24 |
| 2014 | Assessment of the integrity of welded pipes | Šarkočević, Živče ; Arsić, Miodrag ; Sedmak, Aleksandar ; Međo, Bojan ; Mišić, Milan | Article | 24M24 |
| 2014 | Potential for improvement of comfort parameters in off-road vehicles of Serbian armed forces (✓) | Popović, Vladimir ; Sedmak, Aleksandar ; Aleksandar Mićović | Article | 22M22 |
| 2014 | Influence of Mechanical Properties and Microstructural Heterogeneity of Welded Joint Constituents on Tensile Properties and Fracture Toughness at Plane Strain, Kic (✓) | Sedmak, Aleksandar ; I. Čamagić ; Z. Burzić ; Nemanja Vasić ; B. Ćirković ; M.M. Algool | Article | 24M24 |
| 2014 | Determination of the elements of production cycle time in serial production: the Serbian case (✓) | Ćoćkalo, Dragan ; Stanisavljev, Sanja ; Đorđević, Dejan ; Klarin, Milivoj ; Brkić, Aleksandar | Article | 23M23 |
| 2014 | Influence of friction stir welding parameters on properties of 2024 t3 aluminium alloy joints | Eramah, Abdsalam M.; Rakin, Marko ; Veljić, Darko ; Tadić, Srđan ; Radović, Nenad ; Zrilić, Milorad ; Perović, Milenko | Article | 22M22 |
| 2014 | External Costs on the Environment and Exergo-Economics Methods (✓) | Jelić, Ivana ; Adžemović, Mesud; Crnobrnja, Mihailo; Antonijević, Dragi ; Petrović, Nada | Article | Mp. category will be shown later |