Organisations
Inovacioni centar Mašinskog fakulteta u Beogradu d.o.o.
Date issued
- 289 2020 - 2024
- 969 2010 - 2019
- 54 2000 - 2009
- 22 1990 - 1999
- 3 1980 - 1989
Мп-кат.
- 1337 M30/M60
Date issued - custom
The results include the works of researchers who are CURRENTLY employed at the displayed institution.
| Issue Date | Title | Author(s) | Type | М-cat. |
|---|---|---|---|---|
| 2019 | Kontrola kvaliteta vatrostalnih premaza primenom ultrazvučne vibracione metode sa stacionarnim uzorkom | Marko Pavlović   ; Dojčinović, Marina B. ; Radica Prokić-Cvetković ; Andrić, Ljubiša D. ; Fuad Klisura | Conference Paper | Mp. category will be shown later |
| 2019 | A microstructure development during intercritical annealing of ductile iron - the dual phase austempered ductile irons | JANjATOVIĆ, PETAR D. ; RAJNOVIĆ, DRAGAN M. ; Erić Cekić, Olivera A. ; BALOŠ, SEBASTIAN S. ; ŠIĐANIN, LEPOSAVA P. | Conference Paper | Mp. category will be shown later |
| 2019 | Dimensional accuracy of dental models produced by SLA 3D printing technology | Milovanović, Aleksa Lj. ; Miletić, Vesna J. ; Cabunac J.,; Mladenović, Goran M. ; Mitrović, Nenad R. ; Tomic G.,; Milošević, Miloš S. | Conference Paper | Mp. category will be shown later |
| 2019 | Experimental setup development of additively manufactured mandible with teeth and compensations subjected to compressive load | Milošević, Miloš S. ; Postic, S.,; Mitrović, Nenad R. ; Milovanović, Aleksa Lj. ; Travica, M., ; Golubovic, Z., ; Mladenović, Goran M. | Conference Paper | Mp. category will be shown later |
| 2019 | Mechanical properties of surfaces studied by atomic force microscope | Matija, Lidija ; Kojić, Dušan; Petrov, Ljubiša ; Koruga, Đuro | Conference Paper | Mp. category will be shown later |
| 2019 | Experimental determination of type of fracture pla specimens in the function of printing conditions | Popović, Mihajlo D. ; Pjević, Miloš D. ; Mladenović, Goran M. ; Tanović, Ljubodrag M. ; Milošević, Miloš S. ; Milovanović, Aleksa Lj. ; Milošević, N. | Conference Paper | Mp. category will be shown later |
| 2019 | Application of Numerical Methods in Design and Analysis of Orthopedic Implant Integrity | Čolić, Katarina ; Grbović, Aleksandar ; Sedmak, Aleksandar ; Legweel, Kaled | Conference Paper | Mp. category will be shown later |
| 2019 | A Computational Analysis of Old RC Structures Strengthened by Ties Under Removal of Members | LIOLIOS, A.; Hatzigeorgiou, G.; Liolios, K.; Partov, D; Folić, Boris | Conference Paper | Mp. category will be shown later |
| 2019 | Doktoranti u realizaciji projekata za privredu (✓) | Mitrović, Radivoje ; Ivanović, Gradimir; Mišković, Žarko ; Simeunović, Vladimir | Conference Paper | Mp. category will be shown later |
| 2019 | Research of consistency as a stability factor of companies in the Republic of Serbia (✓) | Kirin, Snežana ; Gavrić, Gordana; Vojteški Kljenak, Dragana | Conference Paper | Mp. category will be shown later |
| 2019 | Damages On Laser Peening-Strengthened and Non-Strengthened Nimonic Specimens as Potential Causes of Crack Initiation and Fracture (✓) | Đorđević, Branislav R. ; Čolić, Katarina G. ; Petronić, Sanja Z. ; Mišković, Žarko ; Tatic, Uros; Sedmak, Aleksandar | Conference Paper | Mp. category will be shown later |
| 2019 | Determination of cavitation resistance of sintered basalt samples | Marko Pavlović ; Dojčinović, Marina B. ; Andrić, Ljubiša D. ; Radulović, Dragan S. ; Zoran Čeganjac | Conference Paper | Mp. category will be shown later |
| 2019 | Wear Simulation of the Polymer Based Composite Sliding Bearings by Means of Ansys | Stanković, Miloš B. ; Marinković, Aleksandar B. ; Kolarević, Nenad M. | Conference Paper | Mp. category will be shown later |
| 2019 | Process Mapping of Glass Envelope Design of Geometrically Complex Form | Kosić, Tatjana D. ; Svetel, Igor D. ; Mauro Overend | Conference Paper | Mp. category will be shown later |
| 2019 | Industry 4.0 Programs Worldwide | Majstorović, Vidosav D. ; Mitrović, Radivoje | Conference Paper | Mp. category will be shown later |
| 2019 | Characterization and determination of erosion resistance of refractory materials for application in metallurgy and minnig | Pavlović, Marko ; Dojčinović, Marina; Andrić, Ljubiša; Klisura, Fuad; Sarvan, Muhamed; Radulović, Dragan; Petrov, Milan | Conference Paper | Mp. category will be shown later |
| 2018 | Hydrogen Embrittlement and Prevention of Industrial Components | Đukić, Miloš Z. ; Bakić, Gordana M. ; Rajičić, Bratislav M. ; Vera Šijački Žeravčić; Aleksandar Sedmak | Conference Paper | Mp. category will be shown later |
| 2018 | The light microscopy study by heat tinting of austempered ductile iron microstructure transformation at low temperatures | RAJNOVIĆ, DRAGAN M. ; Erić Cekić, Olivera A. ; ŠIĐANIN, LEPOSAVA P. ; BALOŠ, SEBASTIAN S. ; LABUS-ZLATANOVIĆ, DANKA D. ; DRAMIĆANIN, MIROSLAV R. ; JANjATOVIĆ, PETAR D. | Conference Paper | Mp. category will be shown later |
| 2018 | Fracture analysis of axially flawed ring-shaped bending specimen (✓) | Musrati, Walid; Međo, Bojan ; Gubeljak, Nenad; Štefane, Primož; Veljić, Darko ; Sedmak, Aleksandar ; Rakin, Marko | Conference Paper | Mp. category will be shown later |
| 2018 | NUMERIČKA SIMULACIJA KRETANJA ČESTICA UGLJENOG PRAHA PRILIKOM NAPUŠTANJA MLINSKOG SEPARATORA KROZ KANAL AEROSMEŠE | Stamenković, Ognjen S. ; Dragan Tucaković ; Titoslav Živanović ; Stupar, Goran M. | Conference Paper | Mp. category will be shown later |