|
| Issue Date | Title | Author(s) | Type | Мp-cat. |
| 2025 | LCA of a short-flight belt conveyor | Djordjevic, Milos; Zrnic, Nenad   ; Peric, Milica ; Komatina, Mirko | Article | |
| 2025 | Development of coatings for the protection of metals structures based on pyrophyllite, zeolite and talc | Pavlović, Marko ; Dojčinović, Marina ; Kurtanović, Enita; Marković, Igor | Conference Paper | |
| 2025 | Using offshore oil and gas facilities as a proposed solution for ensuring stability in the Balkan region | Jarić, Marko | Conference Paper | |
| 2025 | Influence of Building Envelope Modeling Parameters on Energy Simulation Results | Muhič, Simon; Manić, Dimitrije ; Čikić, Ante; Komatina, Mirko | Article | |
| 2025 | Mechanisms and Mathematical Modeling of Electrical Breakdown of Noble Gases in the Paschen Minimum Region | Kartalovic, Nenad ; Arbutina, D; Jusic, Alija; Kovacevic, Uros | Article | |
| 2025 | Influence of the Involute Gear Teeth Profile Shape and Running-In on Surface Load Capacity of Cylindrical Gear Pairs | Dimić, Aleksandar ; Ristivojević, Mileta; Kolarević, Nenad ; Mišković, Žarko ; Sedak, Miloš ; Đorđević, Branislav | Article | |
| 2025 | Fatigue remaining life prediction of high pressure turbine casing with unacceptable defects | Grbovic, Aleksandar M. ; Kastratovic, Gordana M. ; Vidanovic, Nenad ; Sedmak, Aleksandar S. ; Popovic, Vladimir ; Sedmak, Simon A.; Bozic, Zeljko | Article | |
| 2025 | CAVITATION RESISTANCE OF TALC-REINFORCED PYROPHYLLITE CERAMICS | Pavlović, Marko ; Dojčinović, Marina ; Stojanović, Mirjana | Conference Paper | |
| 2025 | Notch vs. crack effects on impact toughness and fracture behavior of a duplex steel weldments | Sedmak, Aleksandar ; Perković, Srđa ; Burzić, Zijah; Tadić, Srđan ; Radaković, Zoran ; Sedmak, Simon ; Milovanović, Nikola | Article | |
| 2025 | INFLUENCE OF PRINTING ORIENTATION ON THE ELASTIC MODULUS OF PA12 SPECIMENS OBTAINED BY SLS TECHNOLOGY | Jevtić, Ivana ; Mladenović, Goran ; Milovanović, Aleksa ; Travica, Milan ; Milošević, Miloš | Conference Paper | |
| 2025 | A comparative study on the tensile properties of 3D printed ABS filament and resin: Effects of aging | Golubović, Zorana ; Bojović, Božica ; Kirin, Snežana ; Milovanović, Aleksa ; Danilov, Ivan ; Sedmak, Aleksandar | Article | |
| 2025 | Analysis of the effect of undercuts in misaligned welded joints | Aranđelović, Mihajlo ; Sedmak, Simon ; Đorđević, Branislav ; Radu, Dorin; Petrović, Ana | Conference Paper | |
| 2025 | Identification of crack initiation cause in slewing platform horizontal plate of the excavator SchRs630 | Petrović, Ana ; Momčilović, Nikola ; Aranđelović, Mihajlo ; Sedmak, Simon ; Đorđević, Branislav | Conference Paper | |
| 2025 | Fracture Behaviour of a Ferritic-Austenitic Steel Welded Joints | Aranđelović, Mihajlo ; Petrović, Ana ; Sedmak, Simon ; Đorđević, Branislav | Conference Paper | |
| 2025 | INFLUENCE OF THE JOINT GEOMETRY ON HEAT ENERGY, GENERATED DURING THE PLUNGE STAGE OF FRICTION STIR WELDING | Veljić, Darko; Međo, Bojan ; Alić, Fikret; Sedmak, Aleksandar ; Lazović, Tatjana | Article | |
| 2025 | DIGITAL TWINS IN FRACTURE ANALYSIS OF PIPELINE MATERIALS: A REVIEW OF CURRENT APPROACHES AND METHODOLOGIES | Milošević, Miloš ; Mladenović, Goran ; Mercuri, Francesco; Lorenzoni, Andrea | Conference Paper | |
| 2025 | Cavitation Erosion - Process and Development of Testing Methods | Pavlović, Marko ; Dojčinović, Marina ; Sedmak, Aleksandar ; Popović, Olivera ; Lazović, Vladimir | Article | |
| 2025 | Structural Optimization and Experimental Validation of a Composite Engine Mount Designed for VTOL UAV | Milić, Milica; Svorcan, Jelena ; Ivanov, Toni ; Atanasovska, Ivana ; Momčilović, Dejan B. ; Flajs, Željko; Rašuo, Boško | Article | |
| 2025 | WINDAGE LOSSES OF THE HIGH-SPEED CYLINDRICAL GEAR DRIVES | Dimić, Aleksandar ; Kolarević, Nenad ; Stanković, Miloš ; Mihajlović, Dimitrije | Article | |
| 2025 | Combined approach for integrity assessment of welded joints with multiple defects | Sedmak, Simon ; Aranđelović, Mihajlo ; Đorđević, Branislav ; Petrović, Ana ; Jovičić, Radomir | Conference Paper | |
Inovacioni centar Mašinskog fakulteta u Beogradu d.o.o.
