Researchers
Baloš, Sebastian
Results 81-100 of 241
| Issue Date | Title | Author(s) | Type | Мp-cat. |
|---|---|---|---|---|
| 2019 | Утицај параметара роботског наваривања на особине израђеног елемента конструкције од челика Ѕ355 | Радовановић, Милан; Балош, Себастиан   | Article | 53M53 |
| 2019 | Експериментално одређивање утицаја оксидних топитеља на ТИГ поступак заваривања | Перановић, Драган; Балош, Себастиан | Article | 53M53 |
| 2019 | Suppressing the use of critical raw materials in joining of AISI 304 stainless steel using activated tungsten inert gas welding | Baloš, Sebastian ; Dramićanin, Miroslav ; Janjatović, Petar ; Zabunov, Ivan; Pilić, Branka ; Goel, Saurav; Szutkowska, Magdalena | Article | 21M21 |
| 2019 | Friction Stir Spot Welding of Multiple Ultrathin Sheets of Aluminium-Magnesium Alloy | LABUS-ZLATANOVIĆ, DANKA D. ; BALOŠ, SEBASTIAN S. ; Jean Pierre Bergmann; Michael Grätzel; RAJNOVIĆ, DRAGAN M. ; Tobias Köhler; ŠIĐANIN, LEPOSAVA P. | Conference Paper | Mp. category will be shown later |
| 2019 | A microstructure development during intercritical annealing of ductile iron - the dual phase austempered ductile irons | Janjatović, Petar ; Rajnović, Dragan ; Erić Cekić, Olivera ; Baloš, Sebastian ; Šiđanin, Leposava | Conference Paper | Mp. category will be shown later |
| 2019 | Microstructure, Microhardness, and Wear Properties of Cobalt Alloy Electrodes Coated with TiO2 Nanoparticles | Baloš, Sebastian ; Janjatović, Petar ; Dramićanin, Miroslav ; Labus-Zlatanović, Danka ; Pilić, Branka ; Hanus, Pavel; Jaworska, Lucyna | Article | 21M21 |
| 2019 | Ballistic Behaviour of Austempered Compacted Graphite Iron Perforated Plates | Janjatović, Petar ; Baloš, Sebastian ; Radisavljević, Igor ; Dramićanin, Miroslav ; Cekic, Olivera Eric; Šiđanin, Leposava | Article | 22M22 |
| 2019 | Metal Oxide Nanoparticle-Based Coating as a Catalyzer for A-TIG Welding: Critical Raw Material Perspective | Baloš, Sebastian ; Dramićanin, Miroslav ; Janjatović, Petar ; Zabunov, Ivan; Klobcar, Damjan; Busic, Matija; Grilli, Maria Luisa | Article | 21M21 |
| 2019 | Impact of contaminated fluid on the working performances of hydraulic directional control valves | Karanović, Velibor ; Jocanović, Mitar ; Baloš, Sebastian ; Knežević D.; Macuzic, Ivan | Article | 22M22 |
| 2018 | Flexural strength and modulus of autopolimerized poly(methyl methacrylate) with nanosilica | Baloš, Sebastian ; Pilić, Branka ; Petrović, Đorđe; Petronijevic, Branislava ; Šarčev, Ivan | Article | 23M23 |
| 2018 | Tensile strength retention of resorptive suture materials applied in the stomach wall - an in vitro study | Kreszinger, Mario; Toholj, Bojan; Ačanski, Aleksandar; Baloš, Sebastijan ; Cincović, Marko ; Pećin, Marko; Lipar, Marija; Smolec, Ozren | Article | 23M23 |
| 2018 | Cast Alloys for Reciprocating Engine Heads - Performance Evaluation | Baloš, Sebastian ; Rajnović, Dragan ; Šiđanin, Leposava ; Janjatović, Petar ; Dramićanin, Miroslav ; Howard, Daniel | Conference Paper | Mp. category will be shown later |
| 2018 | Uticaj geometrije ramena alata na osobine zavarenih spojeva dobijenih zavarivanjem trenjem sa mešanjem | Pećanac, Milan ; Baloš, Sebastian | Article | 53M53 |
| 2018 | Fracture behaviour of WC-Co hardmetals with WC partially substituted by titanium carbide | Szutkowska, Magdalena; Boniecki, M; Cygan, S; Kalinka, A; Grilli, Maria Luisa; Baloš, Sebastian S | Conference Paper | Mp. category will be shown later |
| 2018 | Microstructure and cavitation behaviour of alloyed austempered ductile irons | Erić-Cekić, O. ; Dojčinović, Marina ; Rajnović, Dragan ; Šiđanin, Leposava ; Baloš, Sebastijan | Article | 22M22 |
| 2018 | Influence of low temperature on impact energy and microstructure of unalloyed ADI material | Rajnović, Dragan ; Erić Cekić, Olivera A ; Šiđanin, Leposava ; Baloš, Sebastian ; Labus Zlatanović, Danka ; Dramićanin, Miroslav ; Janjatović, Petar | Conference Paper | Mp. category will be shown later |
| 2018 | The light microscopy study by heat tinting of austempered ductile iron microstructure transformation at low temperatures | RAJNOVIĆ, DRAGAN M. ; Erić Cekić, Olivera A. ; ŠIĐANIN, LEPOSAVA P. ; BALOŠ, SEBASTIAN S. ; LABUS-ZLATANOVIĆ, DANKA D. ; DRAMIĆANIN, MIROSLAV R. ; JANjATOVIĆ, PETAR D. | Conference Paper | Mp. category will be shown later |
| 2018 | Орбитално заваривање уз присуство оксидних премаза за повећање дубине увара на нерђајућем челику | Ботић, Бојан; Балош, Себастиан | Article | 53M53 |
| 2018 | Wear Resistance Increase by Friction Stir Processing for Partial Magnesium Replacement in Aluminium Alloys | Baloš, Sebastian ; Labus-Zlatanović, Danka ; Janjatović, Petar ; Dramićanin, Miroslav ; Rajnović, Dragan ; Šiđanin, Leposava | Conference Paper | Mp. category will be shown later |
| 2018 | Ručno - elektrolučno zavarivanje rutilnim elektrodama sa modifikovanom oblogom | Moroz, Nikola; Baloš, Sebastian | Article | 53M53 |