Researchers
Manasijević, Srećko
| Issue Date | Title | Author(s) | Type | М-cat. |
|---|---|---|---|---|
| 2015 | Unapređenje tehnologije livenja nosača zuba bagera vedričara (✓) | Dučić, Nedeljko   ; Ćojbašić, Žarko ; Radiša, Radomir ; Slavković, Radomir ; Manasijević, Srećko ; Milićević, Ivan ; Dragićević, Snežana ; Popović, Marko | Technical reports | Mp. category will be shown later |
| 2015 | Heavy metal ions in the wastewater of the Majdanpek Copper Mine | Šerbula, Snežana ; Ristić, Ana; Manasijević, Srećko ; Dolić, Natalija | Article | 24M24 |
| 2015 | The intermetallic bonding between a ring carrier and aluminum piston alloy (✓) | Manasijević, Srećko ; Dolić, Natalija; Djurdjevic, Mile ; Mišić, Nataša ; Davitkov, Novica | Article | 23M23 |
| 2015 | Analysis of piston microstructure in the most critical zones (✓) | Manasijevic, Srecko ; Natalija Dolić; Djurdjevic, Mile ; Zovko Brodarac, Zdenka; Radiša, Radomir | Article | 22M22 |
| 2015 | Effect of SO2 on the quality of ambient air in Bor | Šerbula, Snežana ; M. Nikolic; Radojević, Ana ; Manasijević, Srećko ; N. Davitkov | Conference Paper | Mp. category will be shown later |
| 2015 | The specifics of risk assessment for small and medium-sized enterprises | Komadinić, Velimir ; Manasijević, Srećko | Conference Paper | Mp. category will be shown later |
| 2014 | Impact of major alloying elements on the solodification parameters of cast hypoeutectic AlSi6Cu (1–4 wt.%) and AlSi8Cu(1−4 wt.%) alloys (✓) | Djurdjević, Mile B. ; Manasijević, Srećko | Article | 24M24 |
| 2014 | MAGMA5 use for optimization of technological paarameters of casting a buckets pelton turbine | Radiša, Radomir ; Manasijević, Srećko ; J.Pristevac | Conference Paper | Mp. category will be shown later |
| 2014 | Atmospheric deposition in the surroundings of open pits and flotation tailings | Šerbula, Snežana ; N. Dolić; Manasijević, Srećko ; Kalinović, Tanja ; M. Ljubomirović | Conference Paper | Mp. category will be shown later |
| 2014 | Analysis of the intermetallic bonding between ring carrier and aluminum piston alloy (✓) | Manasijević, Srećko ; Dolić, Natalija; Zovko Brodarac, Zdenka; Djurdjevic, Mile ; Radiša, Radomir | Article | 21M21 |
| 2014 | Identification of phases formed by Cu and Ni in Al-Si piston alloys | Manasijević, Srećko ; N. Dolić; Raić, Karlo ; Radiša, Radomir | Article | 23M23 |
| 2014 | Optimization Geometry of zhe Body Presses for the fine punching using FEM Analyzis | Radiša, Radomir ; Manasijević, Srećko ; Komadinić, Velimir ; Mandić, Vesna ; M.Stefanović | Article | 52M52 |
| 2014 | Influence of homogenization on structural homogenity of aluminum alloy EN AW-5083 | N.Dolić; Z.Zovko Brodarac; Manasijević, Srećko | Conference Paper | Mp. category will be shown later |
| 2014 | Heavy metals and total sulphur content in vegetables collected in the Bor region (Serbia) | Kalinović, Jelena ; Šerbula, Snežana ; Radojević, Ana ; Kalinović, Tanja ; Manasijević, Srećko ; N. Dolić | Conference Paper | Mp. category will be shown later |
| 2014 | An intermetallic bonding between an aluminum piston alloy and ring carrier (✓) | Manasijević, Srećko ; N.Dolić; Z.Zovko Brodarac; Mile Đurđević ; Radiša, Radomir | Conference Paper | Mp. category will be shown later |
| 2014 | Using MAGMA5 to optimize relevant technological parameters of the process of casting the housing of LED lamp for street lighting | Radiša, Radomir ; Manasijević, Srećko ; J.Pristevac; Mandić, Vesna | Conference Paper | Mp. category will be shown later |
| 2014 | Quantification of the copper phase(s) in Al-5Si-(1-4)Cu alloys using a cooling curve analysis (✓) | Mile Đurđević ; Manasijević, Srećko ; Odanović, Zoran ; N. Dolić; Radiša, Radomir J. | Article | 23M23 |
| 2014 | Filtrating Section Wastewater of the Copper Mine in Majdanpek and its Influence on the River VelikiPek | Šerbula, Snežana ; Ana Ristić; Manasijević, Srećko ; Natalija Dolić | Conference Paper | Mp. category will be shown later |
| 2014 | Conventional methods of piston surface treatment for IC engines | Manasijević, Srećko ; Raić, Karlo ; Trgovčević, Sanja | Article | 24M24 |
| 2014 | Solidification algorithm of Al–Si–Cu-Ni–Mg piston alloy (✓) | Manasijević, Srećko ; Srđan Marković ; Mile Đurđević ; Radiša, Radomir | Conference Paper | Mp. category will be shown later |