Researchers
Manasijević, Srećko
Date issued - custom
| Issue Date | Title | Author(s) | Type | М-cat. |
|---|---|---|---|---|
| 2019 | Determination some thermo-physical and metallurgical properties of aluminum alloys using their known chemical composition (✓) | Huber, Gerhard; Djurdjevic, Mile B.  ; Manasijević, Srećko  | Article | 21aM21a |
| 2019 | Rationalization of a Core Warehouse in the Casting Plant: A Case Study (✓) | Đurđević, Dragan ; Manasijević, Srećko ; Miljuš, Momčilo | Article | 23M23 |
| 2017 | CASTING IMPROVEMENT BASED ON METAHEURISTIC OPTIMIZATION AND NUMERICAL SIMULATION (✓) | Radiša, Radomir ; Dučić, Nedeljko ; Manasijević, Srećko ; Marković, Nemanja ; Ćojbašić, Žarko | Article | 24M24 |
| 2017 | Optimization of the gating system for sand casting using genetic algorithm (✓) | Duc̈ić N. ; Slavkovic R. ; Milicevic I. ; Ćojbašić, Žarko ; Manasijevic, Srecko ; Radiša R. | Article | 23M23 |
| 2017 | Intelligent system for automatic control of the process of filling the mold (✓) | Duc̈ić N. ; Milicevic I. ; Ćojbašić, Žarko ; Manasijevic, Srecko ; Radiša R. ; Slavkovic R. ; Božić M. | Article | 22M22 |
| 2015 | Heavy metal ions in the wastewater of the Majdanpek Copper Mine | Šerbula, Snežana ; Ristić, Ana; Manasijević, Srećko ; Dolić, Natalija | Article | 24M24 |
| 2015 | Al-Fin Bond in Aluminum Piston Alloy & Austenitic Cast Iron Insert (✓) | Manasijević, Srećko ; Radiša, Radomir ; Brodarac, Zdenka Zovko; Dolić, Natalija; Djurdjevic, Mile | Article | 23M23 |
| 2015 | Analysis of piston microstructure in the most critical zones (✓) | Manasijevic, Srecko ; Natalija Dolić; Djurdjevic, Mile ; Zovko Brodarac, Zdenka; Radiša, Radomir | Article | 22M22 |
| 2015 | The intermetallic bonding between a ring carrier and aluminum piston alloy (✓) | Manasijević, Srećko ; Dolić, Natalija; Djurdjevic, Mile ; Mišić, Nataša ; Davitkov, Novica | Article | 23M23 |
| 2014 | Analysis of the intermetallic bonding between ring carrier and aluminum piston alloy (✓) | Manasijević, Srećko ; Dolić, Natalija; Zovko Brodarac, Zdenka; Djurdjevic, Mile ; Radiša, Radomir | Article | 21M21 |
| 2014 | Identification of phases formed by Cu and Ni in Al-Si piston alloys | Manasijević, Srećko ; N. Dolić; Raić, Karlo ; Radiša, Radomir | Article | 23M23 |
| 2014 | Optimization Geometry of zhe Body Presses for the fine punching using FEM Analyzis | Radiša, Radomir ; Manasijević, Srećko ; Komadinić, Velimir ; Mandić, Vesna ; M.Stefanović | Article | 52M52 |
| 2014 | Quantification of the copper phase(s) in Al-5Si-(1-4)Cu alloys using a cooling curve analysis (✓) | Mile Đurđević ; Manasijević, Srećko ; Odanović, Zoran ; N. Dolić; Radiša, Radomir J. | Article | 23M23 |
| 2014 | Impact of major alloying elements on the solodification parameters of cast hypoeutectic AlSi6Cu (1–4 wt.%) and AlSi8Cu(1−4 wt.%) alloys (✓) | Djurdjević, Mile B. ; Manasijević, Srećko | Article | 24M24 |
| 2014 | Conventional methods of piston surface treatment for IC engines | Manasijević, Srećko ; Raić, Karlo ; Trgovčević, Sanja | Article | 24M24 |
| 2014 | pH value and concentrations of total dry residue and suspended matter in the wastewater of the Majdanpek Copper mine | Šerbula, Snežana ; Ristić, Ana; Manasijević, Srećko ; Dolić, Natalija; Davitkov, Novica | Article | 24M24 |
| 2014 | Effect of head treatment on the microstructure and mechanical properties of piston alloys (✓) | Manasijevic, Srecko ; Marković, Srđan ; Ačimović Pavlović, Zagorka ; Raić, Karlo ; Radiša, Radomir | Article | 23M23 |
| 2013 | Optimisation of cast pistons made of Al–Si piston alloy (✓) | Manasijević, Srećko ; Pavlovic-Acimovic, Z ; Raić, Karlo ; Radiša, Radomir ; Kvrgić, Vladimir | Article | 22M22 |
| 2013 | Influence of different contents of Si and Cu on the solidification pathways of cast hypoeutectic Al-(5–9)Si-(1–4)Cu (wt.%) alloys (✓) | Djurdjevic, Mile B. ; Manasijević, Srećko ; Odanović, Zoran ; Radiša, Radomir | Article | 22M22 |
| 2013 | Primena termičke analize u livnicama aluminijuma (✓) | Manasijević, Srećko ; Mile Đurđević | Article | 53M53 |