Researchers
Milošević, Miloš
| Issue Date | Title | Author(s) | Type | М-cat. |
|---|---|---|---|---|
| 2023 | The influence of print orientation and print location on the mechanical characteristics of specimens obtained by SLS technology | Jevtić, Ivana   ; Mladenović, Goran ; Milošević, Miloš ; Milovanović, Aleksa ; Trajković, Isaak | Conference Paper | Mp. category will be shown later |
| 2023 | Experimental and numerical determination of the fracture strength of PA12 material on specimens produced by selective laser sintering | Milošević, Miloš ; Travica, Milan ; Rakin, Marko ; Sedmak, Aleksandar ; Međo, Bojan ; Trajković, Isaak ; Milošević, Miloš | Conference Paper | Mp. category will be shown later |
| 2023 | The influence of printing orientation on the flexural strength of PA 12 specimens produced by SLS (✓) | Jevtic, Ivana ; Mladenovic, Goran ; Milovanovic, Aleksa ; Trajkovic, Isaak ; Djurkovic, Marija ; Korolija, Nenad ; Milosevic, Milos | Article | 22M22 |
| 2023 | Printing orientation influence on tensile strength of PA12 specimens obtained by SLS | Jevtić, Ivana ; Golubović, Zorana ; Mladenović, Goran ; Berto, Filippo; Sedmak, Aleksandar ; Milovanović, Aleksa ; Milošević, Miloš | Article | 23M23 |
| 2023 | Printing parameter optimization of PLA material concerning geometrical accuracy and tensile properties relative to FDM process productivity (✓) | Popović, Mihajlo ; Pjević, Miloš ; Milovanović, Aleksa ; Mladenović, Goran ; Milošević, Miloš | Article | 23M23 |
| 2023 | Experimental Mechanical Characterization of Parts Manufactured by SLA and DLP Technologies | Petrov, Ljubiša ; Bojović, Božica ; Golubović, Zorana ; Sedmak, Aleksandar ; Mišković, Žarko ; Trajković, Isaak ; Milošević, Miloš | Article | 24M24 |
| 2023 | Manufacturing parameter influence on FDM polypropylene tensile properties (✓) | Milovanović, Aleksa ; Golubović, Zorana ; Kirin, Snežana ; Babinsky, Tomas; Šulak, Ivo; Milošević, Miloš ; Sedmak, Aleksandar | Article | 23M23 |
| 2023 | ICT Use Predictors Among the Small and Medium-Sized Enterprises in European Countries (✓) | Cudic, Bojan; Milosevic, Milos | Conference Paper | Mp. category will be shown later |
| 2023 | Deviations Measurements of SLS PA Material at Compressive Specimens | Jevtić, Ivana ; Mladenović, Goran ; Milošević, Miloš ; Trajković, Isaak ; Milovanović, Aleksa | Conference Paper | Mp. category will be shown later |
| 2023 | APPLICATION OF 2D DIGITAL IMAGE CORRELATION METHOD ON THREE-POINT BENDING IN MATERIAL TESTING | Mitrović, Nenad ; Golubović, Zorana ; Mitrović, Aleksandra; Travica, Milan ; Trajković, Isaak ; Milošević, Miloš ; Petrović, Aleksandar | Conference Paper | Mp. category will be shown later |
| 2022 | Experimental Evaluation of Hoop Stress–Strain State of 3D-Printed Pipe Ring Tensile Specimens | Travica, Milan ; Mitrović, Nenad ; Petrović, Aleksandar ; Trajković, Isaak ; Milošević, Miloš ; Sedmak, Aleksandar ; Berto, Filippo | Article | 21M21 |
| 2022 | PIPE RING TENSILE SPECIMENS STRAIN MEASUREMENT | Travica, Milan ; Mitrović, Nenad ; Petrović, Aleksandar ; Trajković, Isaak ; Milošević, Miloš ; Sedmak, Aleksandar ; Berto, Filippo | Conference Paper | Mp. category will be shown later |
| 2022 | Dimensional accuracy of parts obtained by SLS technology | Jevtić, Ivana ; Mladenović, Goran ; Milošević, Miloš ; Milovanović, Aleksa ; Trajković, Isaak ; Travica, Milan | Article | 24M24 |
| 2022 | Laser sintered polyamide specimens - fabrication and tensile testing conditions on different geometries | Trajković, Isaak ; Milošević, Miloš ; Travica, Milan ; Rakin, Marko ; Jevtić, Ivana ; Sedmak, Aleksandar ; Međo, Bojan | Conference Paper | Mp. category will be shown later |
| 2022 | Deviation measurement of SLS PA material regarding location and orientation of printing | Jevtić, Ivana ; Mladenović, Goran ; Milošević, Miloš ; Milovanović, Aleksa ; Trajković, Isaak ; Travica, Milan | Conference Paper | Mp. category will be shown later |
| 2022 | Experimental determination of mechanical properties of cylindrical samples made by additive technology | Joksimović, Aleksandra ; Trajković, Isaak ; Montanari, Matteo; Milošević, Miloš | Conference Paper | Mp. category will be shown later |
| 2022 | COMPARISON OF FRACTURE MECHANICS PARAMETERS DURING TESTING OF SENT SPECIMENS MADE BY DIFFERENT ADDITIVE PRODUCTION TECHNIQUE | Trajković, Isaak ; Milošević, Miloš ; Sedmak, Aleksandar ; Rakin, Marko ; Marsavina, Liviu; Medjo, Bojan | Conference Paper | Mp. category will be shown later |
| 2022 | Side-groove effect on fracture mechanical fatigue testing of PLA material | Milovanović, Aleksa ; Poduška, Jan; Trávníček, Lukáš; Náhlík, Luboš; Sedmak, Aleksandar ; Milošević, Miloš ; Berto, Filippo | Conference Paper | Mp. category will be shown later |
| 2022 | Crack path direction in plane-strain fracture toughness assessment tests of quasi-brittle PLA polymer and ductile PLA-X composite | Milovanović, Aleksa ; Milošević, Miloš ; Trajković, Isaak ; Sedmak, Aleksandar ; Razavi, Mohammad Javad; Berto, Filippo | Conference Paper | Mp. category will be shown later |
| 2022 | Influence of printing parameters on the eligibility of plane-strain fracture toughness results for PLA polymer | Milovanović, Aleksa ; Golubović, Z. ; Trajković, Isaak ; Sedmak, Aleksandar ; Milošević, Miloš ; Valean, E.; Marsavina, Liviu | Conference Paper | Mp. category will be shown later |