Researchers
Rajnović, Dragan
Results 41-60 of 145
| Issue Date | Title | Author(s) | Type | Мp-cat. |
|---|---|---|---|---|
| 2019 | Effect of particle size TiO2 Flux in A-TIG welding | Dramićanin, Miroslav R.   ; Baloš, Sebastian S. ; Janjatović, Petar D. ; Rajnović, Dragan ; Adamović, Savka | Conference Paper | Mp. category will be shown later |
| 2019 | Dual phase austempered ductile iron - microstructure, characteristics, applications | Erić Cekić, Olivera A. ; Janjatović, Petar ; Rajnović, Dragan ; Šiđanin, Leposava ; Baloš, Sebastian | Conference Paper | Mp. category will be shown later |
| 2019 | Friction Stir Spot Welding of Multiple Ultrathin Sheets of Aluminium-Magnesium Alloy | LABUS-ZLATANOVIĆ, DANKA D. ; BALOŠ, SEBASTIAN S. ; Jean Pierre Bergmann; Michael Grätzel; RAJNOVIĆ, DRAGAN M. ; Tobias Köhler; ŠIĐANIN, LEPOSAVA P. | Conference Paper | Mp. category will be shown later |
| 2019 | A microstructure development during intercritical annealing of ductile iron - the dual phase austempered ductile irons | Janjatović, Petar ; Rajnović, Dragan ; Erić Cekić, Olivera ; Baloš, Sebastian ; Šiđanin, Leposava | Conference Paper | Mp. category will be shown later |
| 2019 | ADI materijali - opseg procesiranja i prelazna temperatura - monografija | Erić Cekić, Olivera ; Rajnović, Dragan | Monograph | Mp. category will be shown later |
| 2019 | A critical review of ceramics fracture toughness measurement methods and observations on SEVNB method in case of traditional ceramics | Rajnović, Dragan M. ; Sidjanin, Leposava ; Vucetic, Snezana; Ranogajec, Jonjaua | Conference Paper | Mp. category will be shown later |
| 2019 | The Chip Formation Process the Base for Biomaterials Machinability | Savković, Borislav S. ; Kovač, Pavel ; Rajnović, Dragan M. ; Grujić, Jovan | Conference Paper | Mp. category will be shown later |
| 2018 | Postupak proizvodnje legiranih ADI materijala sa visokom otpornošću na kavitaciju | Erić Cekić, Olivera ; Baloš, Sebastian ; Rajnović, Dragan ; Šiđanin, Leposava ; Janjatović, Petar ; Dramićanin, Miroslav ; Dojčinović, Marina | Technical reports | Mp. category will be shown later |
| 2018 | Cast Alloys for Reciprocating Engine Heads - Performance Evaluation | Baloš, Sebastian ; Rajnović, Dragan ; Šiđanin, Leposava ; Janjatović, Petar ; Dramićanin, Miroslav ; Howard, Daniel | Conference Paper | Mp. category will be shown later |
| 2018 | Ultra-Fine Grained Structure and Fracture Mode in Low Carbon Steel Subjected to Severe Plastic Deformation | Vilotić, Dragana ; Šidjanin, Leposava; Rajnović, Dragan | Conference Paper | Mp. category will be shown later |
| 2018 | Wear Resistance Increase by Friction Stir Processing for Partial Magnesium Replacement in Aluminium Alloys | Baloš, Sebastian ; Labus-Zlatanović, Danka ; Janjatović, Petar ; Dramićanin, Miroslav ; Rajnović, Dragan ; Šiđanin, Leposava | Conference Paper | Mp. category will be shown later |
| 2018 | Influence of low temperature on impact energy and microstructure of unalloyed ADI material | Rajnović, Dragan ; Erić Cekić, Olivera A ; Šiđanin, Leposava ; Baloš, Sebastian ; Labus Zlatanović, Danka ; Dramićanin, Miroslav ; Janjatović, Petar | Conference Paper | Mp. category will be shown later |
| 2018 | Microstructure and cavitation behaviour of alloyed austempered ductile irons | Erić-Cekić, O. ; Dojčinović, Marina ; Rajnović, Dragan ; Šiđanin, Leposava ; Baloš, Sebastijan | Article | 22M22 |
| 2018 | Heat Treated Cast Iron as Ballistic Protection | Baloš, Sebastian ; Radisavljevic, I.; Janjatović, Petar ; Dramićanin, Miroslav ; Labus Zlatanović, Danka ; Rajnović, Dragan ; Šiđanin, Leposava | Conference Paper | Mp. category will be shown later |
| 2018 | The light microscopy study by heat tinting of austempered ductile iron microstructure transformation at low temperatures | RAJNOVIĆ, DRAGAN M. ; Erić Cekić, Olivera A. ; ŠIĐANIN, LEPOSAVA P. ; BALOŠ, SEBASTIAN S. ; LABUS-ZLATANOVIĆ, DANKA D. ; DRAMIĆANIN, MIROSLAV R. ; JANjATOVIĆ, PETAR D. | Conference Paper | Mp. category will be shown later |
| 2017 | Possibility of ADI material use as replacement of high Cr carbidic irons | Rajnović, Dragan ; Baloš, Sebastian ; Dramićanin, Miroslav ; Janjatović, Petar ; Labus Zlatanović, Danka ; Šiđanin, Leposava ; Erić Cekić, Olivera A. | Conference Paper | Mp. category will be shown later |
| 2017 | SITRAM Effect in Ballistic Testing of Perforated Plates Made of ADI Materials | BALOŠ, SEBASTIAN S. ; Radisavljević, Igor Z. ; RAJNOVIĆ, DRAGAN M. ; JANjATOVIĆ, PETAR D. ; DRAMIĆANIN, MIROSLAV R. ; Erić Cekić, Olivera A. ; ŠIĐANIN, LEPOSAVA P. | Conference Paper | Mp. category will be shown later |
| 2017 | Austempered Ductile Iron Perforated Plate with an Increased Ballistic Protection | Baloš, Sebastian ; Radisavljević, Igor Z. ; Janjatović, Petar ; Rajnović, Dragan ; Šiđanin, Leposava ; Dramićanin, Miroslav ; Erić Cekić, Olivera A. | Conference Paper | Mp. category will be shown later |
| 2017 | Uticaj temperature radne ploče 3d štampača na procenat kristalnosti PLA uzoraka izrađenih FDM tehnologijom | RISTIĆ, MIRJANA M. ; Lužanin, Ognjan ; Baloš, Sebastian ; Radusin, Tanja I. ; Rajnović, Dragan ; Šiđanin, Leposava ; Dramićanin, Miroslav | Conference Paper | Mp. category will be shown later |
| 2017 | Depletion of CRM alloying elements from the surface layer during hot isostatic pressing of superalloy IN100 | Rajnović, Dragan ; M. Maćaš; Janjatović, Petar ; Dramićanin, Miroslav ; Labus Zlatanović, Danka ; Baloš, Sebastian S ; Šiđanin, Leposava | Conference Paper | Mp. category will be shown later |