Šiđanin, Leposava

Type

Date issued

140 2000 - 2027

Mp-cat.

79 М30/М60
15 M22
12 M21
10 M80
8 M20/M50
6 M23
2 M21a
2 M21a+
2 M51
2 M52
. next >

Date issued - custom

Year from:

Year to:

Results 81-100 of 140 Results/Page

Issue Date	Title	Author(s)	Type	Мp-cat.
2014	Postupak proizvodnje nelegiranih ADI materijala sa poboljšanom otpornošću na abrazivno habanje	Baloš, Sebastian ; Rajnović, Dragan ; Šiđanin, Leposava ; Dramićanin, Miroslav ; Labus, Danka ; Erić, Olivera	Technical reports	Mp. category will be shown later
2014	Indentation size effect in autopolymerized and microwave post treated poly(methyl methacrylate) denture reline resins	Baloš, Sebastian ; Šiđanin, Leposava ; Pilić, Branka	Article	22M22
2014	The microstructure characterization of unalloyed austempered ductile iron	Rajnović, Dragan ; Erić, Olivera ; Labus, Danka ; Dramićanin, Miroslav ; Baloš, Sebastian ; Šiđanin, Leposava	Conference Paper	Mp. category will be shown later
2014	Grain Size Refinement of Carbon Steel by V-Shape Dies Compression	Vilotić, Marko ; Kakaš, D.; Aleksandrov, S.; Šiđanin, Leposava ; Dženg, J.	Conference Paper	Mp. category will be shown later
2014	TEM study of low carbon steel subjected to severe plastic deformation by multistage compression	Vilotić, Marko ; Šiđanin, Leposava ; Dženg, J.; Aleksandrov, S.; Kakaš, Damir	Conference Paper	Mp. category will be shown later
2014	Austempering Kinetics of Cu-Ni Alloyed Austempered Ductile Iron	Erić Cekić, Olivera ; Šiđanin, Leposava ; Rajnović, Dragan ; Baloš, Sebastian	Article	21M21
2014	Smanjenje olovljenja unutrašnje trase cevi oružja	Popović, Miroslav ; Baloš, Sebastian ; Šiđanin, Leposava ; Rajnović, Dragan ; Ilić, Violeta	Conference Paper	Mp. category will be shown later
2014	The influence of material microstructure on the chip forming process	Kovač, Pavel ; Savković, Borislav ; Šiđanin, Leposava ; Lukač, Ondrej; Mankova, Ildiko	Article	Mp. category will be shown later
2014	Postupak proizvodnje nelegiranih ADI materijala sa poboljšanim otporom na kavitaciju	Erić, Olivera ; Baloš, Sebastian ; Rajnović, Dragan ; Šiđanin, Leposava ; Dramićanin, Miroslav ; Labus, Danka ; Dojčinović, Marina	Technical reports	Mp. category will be shown later
2014	The influence of tool kinematics on surface texture, productivity, power and torque of normal honing	Vrac, Damir; Šiđanin, Leposava ; Baloš, Sebastian ; Kovač, Pavel	Article	22M22
2014	The Effect of Honing Speed and Grain Size on Surface Roughness and Material Removal Rate during Honing	Vrač, Damir; Baloš, Sebastian ; Šiđanin, Leposava	Article	22M22
2013	The morphology of austempered ductile iron surface damaged by cavitation	Dojčinović, Marina ; Erić, Olivera ; Rajnović, Dragan ; Šiđanin, Leposava ; Baloš, Sebastian	Conference Paper	Mp. category will be shown later
2013	Effect of austempering temperature on cavitation behaviour of unalloyed ADI material	Dojčinović, Marina ; Erić, Olivera ; Rajnović, Dragan ; Šiđanin, Leposava ; Baloš, Sebastijan	Article	21a+M21a+
2013	The influence of torsional and tensile pre-straining on the validity of ductile fracture criteria	Vilotić, Dragiša ; Alexandrov, Sergei; Šiđanin, Leposava ; Vilotić, Marko	Article	21M21
2013	Zavarivanje trenjem sa mešanjem	Baloš, Sebastian ; Šiđanin, Leposava ; Rajnović, Dragan ; Vesna Vučić	Conference Paper	Mp. category will be shown later
2013	Influence of water and gaseous environments on tensile properties of austempered ductile iron	Rajnović, Dragan ; Labus, Danka ; Baloš, Sebastian ; Dramićanin, Miroslav ; Erić, Olivera ; Šiđanin, Leposava	Conference Paper	Mp. category will be shown later
2013	The Use of Microscopy in Investigation of Material Microstructure after Machining Process	Kovač, Pavel ; Šiđanin, Leposava ; Savković, Borislav ; Gostimirović, Marin ; Sekulić, Milenko	Conference Paper	Mp. category will be shown later
2013	The SEM study of ADI material embrittlement in water and hydrogen environment	Labus, Danka ; Rajnović, Dragan ; Baloš, Sebastian ; Dramićanin, Miroslav ; Erić, Olivera ; Šiđanin, Leposava	Conference Paper	Mp. category will be shown later
2013	Optimization of geometrical characteristics of perforated plates	Radisavljević, Igor ; Baloš, Sebastian ; Nikacevic, Milutin; Šiđanin, Leposava	Article	21M21
2013	The ductile to brittle transition temperature of unalloyed ADI material	Rajnović, Dragan ; Šiđanin, Leposava	Article	52M52