Researchers

eNauka >  Researchers >  Milošević, Miloš

Milošević, Miloš

CV smanjena_1.JPG picture

Results 1-20 of 252
Issue DateTitleAuthor(s)TypeМp-cat.
2025Application of the DIC Method in Determining Fracture Mechanics Parameters on Ring-shaped Specimens With a Sharp Notch Manufactured Using the FDM TechniqueTrajković, Isaak  ; Balać, Martina  ; Milošević, Miloš  ; Međo, Bojan  Article
22M22
2025DIGITAL TWINS IN FRACTURE ANALYSIS OF PIPELINE MATERIALS: A REVIEW OF CURRENT APPROACHES AND METHODOLOGIESMilošević, Miloš  ; Mladenović, Goran  ; Mercuri, Francesco; Lorenzoni, AndreaConference Paper
Mp. category will be shown later
2025Tribological performance of selective laser sintered pa12 sliding bearings under dry sliding conditionsSimonovic, Ivan  ; Marinkovic, Aleksandar  ; Milkovic, Dragan  ; Miskovic, Zarko  ; Trajkovic, Isaak  ; Milosevic, Milos  ; Milivojevic, Aleksandar  Article
22M22
2025INFLUENCE OF PRINTING ORIENTATION ON THE ELASTIC MODULUS OF PA12 SPECIMENS OBTAINED BY SLS TECHNOLOGYJevtić, Ivana  ; Mladenović, Goran  ; Milovanović, Aleksa  ; Travica, Milan  ; Milošević, Miloš  Conference Paper
Mp. category will be shown later
2025Effect of dental implants loading and design on stress distribution in a mandible boneSedmak, Aleksandar  ; Petrović, Ivana; Milošević, Miloš  ; Dascau, Calin; Golubović, Tamara  ; Vulović, Radun  Article
22M22
2025APPLICATION OF FINITE ELEMENT ANALYSIS (FEA) SIMULATIONS IN MEASURING ROOT SURFACE TEMPERATURE DURING CRYOTHERAPYRadivojević, Ognjen; Ivanović, Milica  ; Ivanov, Toni  ; Nešković, Jelena; Manojlović, Dragica; Milošević, Miloš  Conference Paper
Mp. category will be shown later
2025Application of Pipe Ring Notched Tensile (PRNT) Specimens to Fracture Mechanics Testing of Ductile Metallic MaterialsTrajković, Isaak  ; Tanasković, Jovan  ; Radosavljević, Zoran; Milošević, Miloš  ; Medjo, Bojan  ; Lozanović, Jasmina Article
21M21
2025Digital twin-based numerical simulation of stress distribution in the mandible with dental implantsSedmak, Aleksandar  ; Petrović, Ivana; Milošević, Miloš  ; Dascau, Cristian; Milovanović, Aleksa  ; Vulović, Radun  Article
22M22
2025Impact properties of FDM-grade PLA polymer relative to infill densityMilovanović, Aleksa  ; Paunić, Milovan  ; Galațanu, Sergiu-Valentin; Filipović, Ivana  ; Milošević, Miloš  ; Marșavina, Liviu; Sedmak, Aleksandar  Article
22M22
2025The effect of infill density on fracture toughness results of PLA materialMilovanović, Aleksa  ; Babinský, Tomáš; Sedmak, Aleksandar  ; Filipović, Ivana  ; Milošević, Miloš  Conference Paper
Mp. category will be shown later
2025Physicochemical and biological properties of bioactive calcium aluminate dental cement enriched with zirconium dioxideIlić, Veljko  ; Antonijević, Đorđe  ; Petrović, Božana  ; Biočanin, Vladimir  ; Jović Orsini, Nataša  ; Potočnik, Jelena  ; Milošević, Miloš  ; Trajković, Isaak  ; Paraš, Smiljana; Jokanović, Vukoman ;
Danilović, Vesna  ; Ćetković, Dejan  ; Milutinović-Smiljanić, Sanja  ;
Article
21aM21a
2025The effect of natural aging on the tensile properties of PETG-CF filamentMilošević, Nenad  ; Trajković, Isaak  ; Maslarević, Aleksandar  ; Milošević, Miloš  ; Mercuri, FrancescoConference Paper
Mp. category will be shown later
2025INVESTIGATION OF TRIBOLOGICAL BEHAVIOUR OF PA12 SLIDING BEARINGS PRODUCED BY SELECTIVE LASER SINTERINGSimonović, Ivan  ; Marinković, Aleksandar  ; Milković, Dragan  ; Mišković, Žarko  ; Trajković, Isaak  ; Milošević, Miloš  ; Milivojević, Aleksandar  Conference Paper
Mp. category will be shown later
2024Dimensional Accuracy of Compressive Specimens Obtained by SLS TechnologyJevtić, Ivana  ; Mladenović, Goran  ; Milošević, Miloš  ; Milovanović, Aleksa  ; Travica, Milan  ; Trajković, Isaak  Conference Paper
Mp. category will be shown later
2024Development of a Method for Testing Temperature Distribution During 3D Printing of Specimens with Application in Aerospace IndustryGolubović, Zorana  ; Travica, Milan  ; Mitrović, Nenad  ; Trajković, Isaak  ; Milošević, Miloš  Book parts
Mp. category will be shown later
2024Influence of Aging on the Flexural Strength of PLA and PLA-X 3D-Printed MaterialsMitrović, Nenad  ; Golubović, Zorana  ; Mitrović, Aleksandra  ; Travica, Milan  ; Trajković, Isaak  ; Milošević, Miloš  ; Petrović, Aleksandar  Article
21M21
2024Comparative analysis of ABS materials mechanical propertiesGolubović, Zorana  ; Bojović, Božica  ; Petrov, Ljubiša  ; Sedmak, Aleksandar  ; Milovanović, A.; Mišković, Žarko  ; Milošević, Miloš  Conference Paper
Mp. category will be shown later
2024Tensile properties of pure PLA polymer dedicated for additive manufacturingMilovanović, Aleksa  ; Sedmak, Aleksandar  ; Paunić, Milovan  ; Mitrović, Aleksandra  ; Popović, Mihajlo  ; Milošević, Miloš  Article
22M22
2024Degradation of the surface of sintered samples based on cordierite and talc under the effect of cavitationPavlović, Marko  ; Dojčinović, Marina  ; Sedmak, Aleksandar  ; Popović, Olivera  ; Milošević, Miloš  ; Trumbulović, Ljiljana; Milovanović, AleksandarConference Paper
Mp. category will be shown later
2024Layer thickness influence on impact properties of FDM printed PLA materialMilovanović, Aleksa  ; Galațanu, Sergiu-Valentin; Sedmak, Aleksandar  ; Marsavina, Liviu; Trajković, Isaak  ; Popa, Cosmin-Florin; Milošević, Miloš  Conference Paper
Mp. category will be shown later