Researchers
Pjević, Miloš
Results 1-20 of 89
| Issue Date | Title | Author(s) | Type | Мp-cat. |
|---|---|---|---|---|
| 2025 | Additive Technologies in the Service of Advanced Robotics and Vice Versa | Pjevic, Milos   | Conference Paper | Mp. category will be shown later |
| 2025 | TENSILE STRENGTH ANALYSIS OF POLYMERS FABRICATED USING FUSED FILAMENT FABRICATION | Lazarević, Natalija; Andjelić, Kristina; Lazić, Aleksandar; Popović, Mihajlo ; Mladenović, Goran ; Pjević, Miloš ; Milovanović, Aleksa | Conference Paper | Mp. category will be shown later |
| 2025 | IMPLEMENTATION AND OPTIMIZATION OF THE DELTA 3D PRINTER CONTROL SYSTEM | Lazić, Aleksandar; Lazarević, Natalija; Popović, Mihajlo ; Pjević, Miloš | Conference Paper | Mp. category will be shown later |
| 2025 | OPTIMIZATION OF THE DELTA 3D PRINTER STRUCTURE | Lazarević, Natalija; Lazić, Aleksandar; Popović, Mihajlo ; Pjević, Miloš | Conference Paper | Mp. category will be shown later |
| 2025 | APPLICATION OF RULE BASED PARAMETRIC COMPUTER PRODUCT DESIGN | Mladenović, Goran ; Puzović, Radovan ; Milovanović, Marko; Filipović, Ivana; Popović, Mihajlo ; Pjević, Miloš | Conference Paper | Mp. category will be shown later |
| 2025 | Additive Manufacturing: A Key to Advancing Injection Molding Efficiency | Milutinović, Mladomir ; Movrin, Dejan ; Pjević, Miloš ; Popović, Mihajlo | Reviews | 22M22 |
| 2025 | VIBRATION CHARACTERISTICS OF AN OPTIMIZED CANTILEVER BEAM | Tomović, Aleksandar ; Pjević, Miloš ; Veg, Marko ; Obradović, Aleksandar ; Mitrović, Zoran | Conference Paper | Mp. category will be shown later |
| 2025 | VIBRATION CHARACTERISTICS OF 3D PRINTED STEPPED CANTILEVER BEAM | Pjević, Miloš ; Tomović, Aleksandar ; Veg, Marko ; Zorić, Nemanja ; Popović, Mihajlo | Conference Paper | Mp. category will be shown later |
| 2024 | Free Form Surface Machining – Comparation of Machining Strategies Using Commercial CAM Software | Mladenovic, Goran ; Puzovic, Radovan ; Popovic, MIhajlo ; Pjevic, Milos | Conference Paper | Mp. category will be shown later |
| 2024 | Tensile strength and stiffness properties of additively manufactured PET-G polymer-based composite plates reinforced with different weight fractions of short carbon fibers | Janković, Milan ; Balać, Igor ; Popović, Mihajlo ; Pjević, Miloš ; Miloš, Marko | Article | 22M22 |
| 2024 | UTICAJ PROMENE PARAMETARA NA MEHANIČKA SVOJSTVA PROIZVODA DOBIJENIH ADITIVNIM TEHNOLOGIJAMA | Lazarević, Natalija; Anđelić, Kristina; Lazić, Aleksandar; Popović, Mihajlo ; Pjević, Miloš ; Milovanović, Aleksa | Conference Paper | Mp. category will be shown later |
| 2024 | 3D SCANING AND INSPECTION GEOMETRICAL PARAMETERS OF SPROCKET TOOTH PROFILE | Stojadinović, Slavenko ; Pjević, Miloš ; Slavković, Nikola ; Puzović, Radovan | Conference Paper | Mp. category will be shown later |
| 2024 | Mass optimization of PLA cantilever beams | Pjević, Miloš ; Tomović, Aleksandar ; Popović, Mihajlo ; Obradović, Aleksandar | Conference Paper | Mp. category will be shown later |
| 2024 | THE POST-PROCESSING METHOD FOR LARGE-SIZED PARTS PRODUCED USING SLA/mSLA TECHNOLOGY | Pjević, Miloš ; Popović, Mihajlo ; Milovanović, Aleksa ; Puzović, Radovan ; Mladenović, Goran | Conference Paper | Mp. category will be shown later |
| 2024 | PRIKAZ ADITIVNE TEHNOLOGIJE EKSTRUDIRANJEM MATERIJALA ZA IZRADU DELOVA OD KOMPOZITA | Jotić, Milica; Popović, Mihajlo ; Pjević, Miloš ; Bojović, Božica | Conference Paper | Mp. category will be shown later |
| 2024 | PROCENA RIZIKA ADITIVNIH PROIZVODNIH TEHNOLOGIJA PRIMENOM KINIJEVE METODE | Pejčić, Danilo ; Mišković, Žarko ; Popović, Mihajlo ; Pjević, Miloš ; Mitrović, Radivoje ; Magdolen, Lubos; Danko, Jan | Conference Paper | Mp. category will be shown later |
| 2024 | ADITIVNE TEHNOLOGIJE KAO ALAT ZA UNAPREĐENJE PROCESA INJEKCIONOG PRESOVANJA | Movrin, Dejan; Pjević, Miloš ; Popović, Mihajlo ; Milutinović, Mladomir | Conference Paper | Mp. category will be shown later |
| 2024 | Алати за обликовање лима - практикум за моделирање делова и алата у програму Creo Parametric | Поповић, Михајло ; Пјевић, Милош | Text book | Mp. category will be shown later |
| 2024 | PROJEKTOVANJE I IZRADA OKVIRA BESPILOTNE LETELICE PRIMENOM GENERATIVNOG DIZAJNA I ADITIVNIH TEHNOLOGIJA | Krezović, Nemanja; Bojović, Božica ; Pjević, Miloš ; Popović, Mihajlo | Conference Paper | Mp. category will be shown later |
| 2023 | State of the art in the field of cold forging tools | Varničić, Ilija; Pjević, Miloš ; Popović, Mihajlo | Conference Paper | Mp. category will be shown later |