Researchers
Pjević, Miloš
Results 41-60 of 89
| Issue Date | Title | Author(s) | Type | Мp-cat. |
|---|---|---|---|---|
| 2021 | State of the art of micro-cutting | Pjević, Miloš   ; Tanović, Ljubodrag | Conference Paper | Mp. category will be shown later |
| 2021 | Applicability of rapid tooling in injection molding application | Pjević, Miloš ; Popović, Mihajlo ; Mladenović, Goran ; Tanović, Ljubodrag; Puzović, Radovan | Conference Paper | Mp. category will be shown later |
| 2021 | Experimental investigation of the tool radius and micro-cutting speed influence on micro-cutting mechanisms for marble based material | Pjević, Miloš ; Popović, Mihajlo ; Tanović, Ljubodrag | Article | 22M22 |
| 2021 | Rough milling with end mill cutter in apllication for free form surfaces machining | Mladenović, Goran ; Tanović, Ljubodrag; Puzović, Radovan ; Pjević, Miloš ; Popović, Mihajlo ; Jevtić, Ivana | Conference Paper | Mp. category will be shown later |
| 2020 | Recycling system for the FDM/FFF method material designed for small and medium-sized production batches | Pjević, Miloš ; Popović, Mihajlo ; Tanović, Ljubodrag ; Mladenović, Goran | Article | 24M24 |
| 2020 | Razvoj nove generacije domacih obradnih sistema rezultati istrazivanja za 2019. godinu | Tanović, Ljubodrag M. ; Živanović, Saša T. ; Puzović, Radovan M. ; Kokotović, Branko M. ; Popović, Mihajlo D. ; Slavković, Nikola R. ; Mladenović, Goran ; Stojadinović, Slavenko M. ; Pjević, Miloš D. ; Vorkapić, Nikola | Conference Paper | Mp. category will be shown later |
| 2020 | Experimental identification of the springback angle during the sheet metal processing of wider range of materials assisted with rapid tooling | Pjević, Miloš D. ; Popović, Mihajlo D. ; Tanović, Ljubodrag M. | Article | Mp. category will be shown later |
| 2020 | Pregled tehnologija brze izrade prototipova pomoću subtraktivnih, aditivnih i formativnih procesa | Živanović, Saša ; Popović, Mihajlo ; Vorkapić, Nikola ; Pjević, Miloš ; Slavković, Nikola | Article | 22M22 |
| 2020 | An additive manufacturing benchmark artifact and deviation measurement method | Vorkapić, Nikola ; Pjević, Miloš ; Popović, Mihajlo ; Slavković, Nikola ; Živanović, Saša | Article | 22M22 |
| 2020 | Razvoj sistema za automatsko projektovanje tehnologije predobrade delova sa složenim površinama | Mladenović, G. ; Tanović, Ljubodrag M. ; Milovanović, M.; Popović, Mihajlo D. ; Puzović, Radovan M. ; Pjević, Miloš D. | Conference Paper | Mp. category will be shown later |
| 2020 | Influence of the part cooling during the printing process on the quality of polymer parts produced by fff/ffd method | Pjević, Miloš D. ; Popović, Mihajlo D. ; Goran M. Mladenovic ; Milos Milosevic ; Tanović, Ljubodrag M. | Conference Paper | Mp. category will be shown later |
| 2020 | Correlation between static indentation and micro cutting marble-based material | Pjević, Miloš D. ; Popović, Mihajlo D. ; Tanović, Ljubodrag M. | Conference Paper | Mp. category will be shown later |
| 2020 | Concept development for rough milling of free form surfaces | Goran M. Mladenovic ; Marko J. Milovanovic; Tanović, Ljubodrag M. ; Puzović, Radovan M. ; Pjević, Miloš D. ; Popović, Mihajlo D. | Conference Paper | Mp. category will be shown later |
| 2020 | The Development of CAD/CAM System for Automatic Manufacturing Technology Design for Part with Free Form Surfaces | Mladenović, Goran ; Milovanović, Marko; Tanović, Ljubodrag; Puzović, Radovan ; Pjević, Miloš ; Popović, Mihailo ; Stojadinović, Slavenko | Conference Paper | Mp. category will be shown later |
| 2020 | Variable layers thickness optimization of the pla parts formed by fff/ffd method | Popović, Mihajlo D. ; Pjević, Miloš D. ; Goran Mladenovic ; Milos Milosevic ; Liviu Marsavina; Filippo Berto | Conference Paper | Mp. category will be shown later |
| 2020 | Recycling system for the fdm/fff method material designed for small and medium-sized production batches | Pjević, Miloš D. ; Popović, Mihajlo D. ; Tanović, Ljubodrag M. ; Goran Mladenović | Conference Paper | Mp. category will be shown later |
| 2020 | Development of cam system for rough machining in free form surface manufacturing | Goran Mladenović ; Tanović, Ljubodrag M. ; Puzović, Radovan M. ; Marko Milovanović; Popović, Mihajlo D. ; Pjević, Miloš D. ; Vojislav Simonović | Conference Paper | Mp. category will be shown later |
| 2020 | Eksperimentalna identifikacija ugla elastičnog vraćanja kod šireg spektra materijala | Jovančićević, L.; Popović, Mihajlo D. ; Pjević, Miloš D. ; Tanović, Ljubodrag M. | Conference Paper | Mp. category will be shown later |
| 2020 | Istraživanje uticaja parametara obrade na pokazatelje kvaliteta pri obradi rezanjem polimera | Kalabić R.; Popović, Mihajlo D. ; Pjević, Miloš D. ; Mladenović, G. ; Tanović, Ljubodrag M. | Conference Paper | Mp. category will be shown later |
| 2019 | Determination of the Optimal Regression Model for the Measurement Quality Characteristics of the Micro Cutting Stone-Based Materials | Pjević, Miloš ; Stojadinović, Slavenko ; Tanović, Ljubodrag ; Popović, Mihailo ; Mladenović, Goran ; Puzović, Radovan | Conference Paper | Mp. category will be shown later |